Pressing Instructions

Follow the steps below to properly apply your PrimePress DTF transfers for the best durability and finish.

Heat Press Method (Recommended)

  1. Preheat heat press to 310°F

  2. Press for 12–15 seconds using medium pressure

  3. Peel hot or cold (your choice)

  4. Press again for 5 seconds using parchment paper or a Teflon sheet

  5. Done! Properly applied transfers can last 100+ washes

Household Iron Method

  1. Set iron to highest heat (cotton setting, no steam)

  2. Press firmly on the design for 30–40 seconds

  3. Peel warm

  4. Press again for 10–15 seconds with firm pressure

⚠️ Results may vary with household irons. A heat press is strongly recommended for best durability.

Fabric Compatibility

DTF transfers work on:

  • Cotton

  • Polyester

  • Cotton/poly blends

  • And more

Care Instructions

  • Wait 24 hours before washing

  • Wash garments inside out

  • Use cold water only

  • Tumble dry low heat or hang dry

  • Do not iron directly on the design